|
PSP Getting Started
Great!
You have just bought your brand new PSP and you want to get started.
You can use your manual that came with your Sony PSP or you can
use the guide below.
Make sure you do follow the instructions below properly
so you don have any problems. Once your up and running ou cn then
buy cheap Sony PSP UK games from the site and you can join our
Sony PSP UK forum which is free and talk to other PSP owners online.
Enjoy......
1. Battery Pack and AC Adaptor
Before using the Sony PSP UK™ system for the first time, the battery must
be charged. Insert the battery pack into the system to charge
the battery.
INSERTING THE BATTERY PACK:
1. Remove the battery cover by holding down the push button and
sliding the battery cover open.
2. Insert the battery pack. Align the bottom surface of the battery
pack with the system to attach.
3. Replace the battery cover.
4. Align the tabs and slide the battery cover in the direction
of the arrow until it locks firmly into place.
Warning The socket-outlet shall be installed near the equipment
and shall be easily accessible. Do not plug the AC power cord
for the Sony PSP UK™ system into an electrical outlet until you have made
all other connections.
CHARGING THE BATTERY:
1. Plug the AC power cord into the AC adaptor.
2. Connect the AC adaptor to the DC IN 5V connector on the system
bottom.
3. Plug the AC power cord into an electrical outlet. The power
indicator on the Sony PSP UK™ lights up in orange indicating that charging
has begun. The power indicator turns off once the battery is fully
charged.
4. Unplug the AC power cord from the electrical outlet and disconnect
the AC adaptor from the Sony PSP UK™ system once the system is fully charged.
Back to the top
2. Power, Sleep Mode and Hold Mode
TURNING THE Sony PSP UK™ SYSTEM ON AND OFF
To turn the Sony PSP UK™ system on, locate the power/hold switch on the
right side of the Sony PSP UK™ system. Slide the switch up and release.
The system will power up.
To turn the system off, locate the power/hold switch on the right
side of the system and slide the switch up and hold for two seconds.
The system will shut down.
PUTTING THE SYSTEM INTO SLEEP MODE
Putting the system into sleep mode allows you to effectively pause
any current activity and place the system into a low power sleep
state. While in sleep mode, the system turns off the screen, disables
any wireless activity, and does not respond to button presses.
When power is resumed, these functions are quickly restored and
usage can resume with minimal interruption.
NOTE: If sleep mode is cleared during video or audio playback,
the screen will return to the home menu.
To enter sleep mode:
• With the system turned on and a game playing, slide the power/hold
switch up. Hold the switch for less than 2 seconds. The power
indicator flashes and then turns off, and the system enters sleep
mode.
NOTE: Do not put the system into sleep mode while the Memory Stick
Duo™ access indicator is on, as it may cause data loss or corruption.
Additionally, not all software will feature the sleep mode function.
Please contact the publisher of the title for more information.
To exit sleep mode:
• Slide the power/hold switch up again.
If the battery runs out while in sleep mode, when the sleep mode
is cleared, the system will not return to the screen that was
displayed before entering sleep mode. It is recommended that you
save game data before putting the system into sleep mode.
PUTTING THE SYSTEM INTO HOLD MODE
When the Sony PSP UK™ system is in hold mode, the system buttons are locked
and do not function. This mode is used to avoid unintended operation
of the system.For example, it allows you to disable the buttons
while music or movies are playing so as to not cause unintended
operation.
To enter hold mode:
• Slide the power/hold switch on the right side of the Sony PSP UK™ system
down. The hold indicator will turn yellow.
To clear hold mode:
• Slide the power/hold switch back to its original position.
TURNING THE SCREEN OFF
To conserve power, the screen can be turned off when it is not
needed (for example, when playing music). Find the backlight button
located directly to the right of the Sony PSP UK™ logo on the front of
the system. Hold down the backlight button for 2 seconds to turn
the screen off. To turn the screen back on, simply press this
button once. Note that this can be used in conjunction with the
power/hold switch after turning off the screen to additionally
protect against unintended operation.
Back to the top
3. Inserting and removing a UMD™
TO INSERT A UMD™
Warning Do not eject a UMD™ during playback.
1. Slide the open latch on the top of the Sony PSP UK™ system. The disc
cover opens.
2. Insert the UMD™ with the disc label facing the system rear.
Slide the UMD™ down the metal guides and press down until fully
inserted. You should hear a slight click, indicating that the
UMD™ is held in place.
3. Close the disc cover.
TO REMOVE A UMD™
1. Check that the UMD™ is not in use.
2. Hold the Sony PSP UK™ system with the top of the system facing up.
3. Slide the open latch on the top of the system to open the disc
cover. The disc cover will open and the UMD™ will eject.
4. Remove the UMD™.
NOTE: The following installation pages are simplified versions
of the installation instructions in the manuals. For additional
details, please refer to your hardware instruction manual.
Back to the top
4. Inserting and removing a Memory
Stick Duo™
Warning Keep Memory Stick Duo™ media out of the reach of small
children, as the media could be swallowed by accident.
INSERTING A MEMORY STICK DUO™
1. Open the slot cover for the Memory Stick Duo™ located on the
left side of the Sony PSP UK™ system.
2. With the printed side of the Memory Stick Duo™ facing out,
slide the Memory Stick Duo™ into the slot in the direction of
the arrow printed on the Memory Stick Duo™.
3. Press the Memory Stick Duo™ until fully inserted.
4. Slide the slot cover back into its original position.
REMOVING A MEMORY STICK DUO™
1. First check that the Memory Stick Duo™ access indicator located
on the lower left of the system is not lit. Do not eject a Memory
Stick Duo™ while the system is loading or saving to it as this
may cause data loss or corruption.
2. Open the slot cover for the Memory Stick Duo™.
3. Press the Memory Stick Duo™ and then release to eject it from
the system.
Back to the top
|
